Soloist Software |
SOLOIST-MC |
Full installation of
Soloist controller and selected software components on a new system. Full
part number includes software options listed below. Pricing is summation of
selected software products. Maintenance (software update) included in price
for 1 year from date of purchase.
MOTION COMPOSER
STANDARD: Includes the Integrated Development Environment, Scope, SystemDiagnostics, and System Maintenance; Soloist Motion
Composer is intended for deployment on desktop or industrial PCs with a
minimum Intel Pentium 4 processor, 512 MB RAM, Windows® XP or Windows® Vista Business
(without SP1 installed); a full list of PC requirements and recommendations
is available at www.aerotech.com. Includes the following software options:
|
License |
-MACHINE |
Provides the ability
to write, compile, execute, debug programs in AeroBasic;
full access to .NET 2.0 and C Library; access full diagnostics, fault, and
status information; access and set I/O, registers, and variables; collect,
analyze, and save data; view files from machine for analysis and record
keeping; connect PC to machine through Ethernet TCP/IP or USB; upgrades can
be installed (firmware or controller) using Loader;includes Soloist-MC Standard; Note: The price of the first MACHINE license is included
in the hardwareprice. The list price of
the MACHINE license is used for multiple license copies and/or computing the Maintenance
Price.
|
-DEVELOPER |
Provides the ability
to write, compile, execute, debug programs in AeroBasic;
full access to .NET 2.0 and C Library; access full diagnostics, fault, and
status information; access and set I/O, registers, and variables; collect,
analyze, and save data; view files from machine for analysis and record
keeping; connect PC tomachine through Ethernet
TCP/IP or USB; CANNOT upgrade firmware or controller software; CANNOT simulate
trajectory; includes Soloist-MC Standard except loader; Note: System and
Control Options are not valid
for Developer License
|
Controller Options |
-DYNAMIC CONTROLS
TOOLBOX |
Includes Harmonic
Cancellation |
-ENHANCED THROUGHPUT
MODULE |
Includes setup and
monitoring screens of the ETM module; included in the price of the hardware
modules sold separately |
System Options |
-ETHERNET/IP |
ODVA certified EtherNet/IP™ module provides full integration with Allen
Bradley PLC and programmable from RSLogix™. Module
has two APIs: ASCII and Register-to-Register
|
Motion Composer (MC)
Options |
-MOTION DESIGNER |
The Motion Designer
is an add-on software component to the Digital Scope that provides the
ability to create, import, run, and evaluate motion profiles (trajectories)
|
-LABVIEW |
Includes LABVIEW® 8.2
VI samples
|
Maintenance |
-MAINTENANCE |
First year of
maintenance is included with the initial purchase; additional years can be
purchased
|
Version |
-CURRENT |
The most current release of 3.XX software |
-LEGACY |
The most current release of 2.XX software |
Accessories |
ENET-XOVER-9 |
0.9 m (3 ft) Ethernet
cross-over cable |
ENET-XOVER-15 |
1.5 m (5 ft) Ethernet
cross-over cable |
ENET-XOVER-30 |
3 m (9.8 ft) Ethernet
cross-over cable |
ENET-XOVER-45 |
4.5 m (14.7 ft)
Ethernet cross-over cable |
ENET-XOVER-75 |
7.5 m (24.6 ft)
Ethernet cross-over cable |
USB-AMBM-18 |
0.9 m (3 ft) USB
cable A-male to B-male |
USB-AMBM-30 |
3.05 m (10 ft) USB
cable A-male to B-male |
USB-AMBM-45 |
4.6 m (15 ft) USB
cable A-male to B-male |
HT |
Handheld terminal |
JOY |
Joystick with 5 ft
(1.5 m) cable |
JI |
Industrial joystick
with 1.5 m (5 ft) cable |
C19791-30 |
Joystick extension
cable, flying leads, 3 m (10 ft); requires I/O option if used on the Soloist
MP 10 |
HWA32-26HD-50 |
Soloist CP/Soloist MP handwheel with 5 meter cable and 26-pin
high-density connector |
HWA32-26HD-30 |
Soloist CP/Soloist MP handwheel with 3 meter cable and 26-pin
high-density connector |
HWA32-FLY-30 |
Soloist CP/Soloist MP handwheel with 3 meter cable and flying leads |
C20931-5 |
Soloist MP Micro
9-pin D connector to standard 9-pin D connector; connects to J201 for
auxiliary encoder input |
C20932-5 |
Soloist MP Micro
9-pin D connector to standard 25-pin D style connector; connects to J201 for
auxiliary encoder input |
ECZ01343 |
Soloist
MP Micro 9-pin D connector to flying leads; connects to J201 for auxiliary
encoder input |
|
|
|
|
