Automation 3200 Software |
A3200-MC |
A3200: Full
installation of Automation 3200 Controller and selected software components
on a new system. Full part number includes options listed below. Pricing is
summation of selected products. Maintenance (software update) included in
price for one year from date of purchase. A3200 is intended for deployment on
desktop or industrial PCs with a minimum Intel Pentium 4 processor (AMD and
Celeron not recommended), Intel 9XX-series chipset (numbered 915 or higher),
512 MB RAM, Windows® XP or Windows® Vista Business (without SP1 installed). A
full list of PC requirements and recommendations is available at
www.aerotech.com.
|
| |
MOTION
COMPOSER STANDARD: Includes the Integrated Development Environment, Parameter
Editor, Tuning Scope, System Diagnostics, and System Maintenance. Includes
the following software options:
|
License |
-MACHINE |
and C
Library; access full diagnostics, fault, and status information; access and
set I/O, registers, and variables; collect, analyze, and save data; view
files from machine for analysis and record keeping; connect PC to machine
directly with FireWire® card; connect PC to machine remotely through Ethernet
TCP/IP; upgrades can be installed (firmware or controller) using Loader; 2
axes of software motion engine; simulate trajectory on PC; installs RTX on
the PC; includes A3200-MC Standard |
-DEVELOPER |
and C
Library; access full diagnostics, fault, status information, and RTX
properties; access and set I/O, registers, and variables; collect, analyze,
and save data; view files from machine for analysis and record keeping;
connect PC to machine remotely through Ethernet TCP/IP; simulate trajectory
on PC; installs RTX on the PC; CANNOT upgrade firmware or controller software
(No loader, Nreg or NENetCfg); CANNOT directly connect to drives with
FireWire® and run; includes A3200-MC Standard except loader, nreg, and
NENetCfg; Note: Axes and Control Options are not valid for Developer License |
-REMOTE |
fault, and
status information; access and set I/O, registers, and variables; collect,
analyze, and save data; view files from machine for analysis and record
keeping; connect remotely through Ethernet TCP/IP to Machine License (if no
connection, no features can be accessed); CANNOT upgrade firmware or controller
software; CANNOT directly connect with FireWire® to machine to run; CANNOT
simulate trajectory; DOES NOT install RTX on the PC; includes A3200-MC
Standard except loader, nreg, NENetCfg, and RTX; Note: Axes and Control
Options are not valid for Remote License |
Axes |
-2 AXES |
Software
only motion, robotics, and I/O controller; provides 2 axes coordinated motion
and 4.5M FireWire® cable |
-4 AXES |
Software
only motion, robotics, and I/O controller; provides 4 axes coordinated motion
and 4.5M FireWire® cable |
-6 AXES |
Software
only motion, robotics, and I/O controller; provides 6 axes coordinated motion
and 4.5M FireWire® cable |
-8 AXES |
Software
only motion, robotics, and I/O controller; provides 8 axes coordinated motion
and 4.5M FireWire® cable |
-10 AXES |
Software
only motion, robotics, and I/O controller; provides 10 axes coordinated
motion and 4.5M FireWire® cable |
-12 AXES |
Software
only motion, robotics, and I/O controller; provides 12 axes coordinated
motion and 4.5M FireWire® cable |
-14 AXES |
Software
only motion, robotics, and I/O controller; provides 14 axes coordinated
motion and 4.5M FireWire® cable |
-16 AXES |
Software
only motion, robotics, and I/O controller; provides 16 axes coordinated
motion and 4.5M FireWire® cable |
-32 AXES |
Software
only motion, robotics, and I/O controller; provides 32 axes coordinated
motion and 4.5M FireWire® cable |
Note: Old part number – NMotion SMC-nn
|
Controller Options |
-FIVE AXIS
CONTOURING |
More than 4
axes of coordinated motion with a single motion command |
Note: Old part number – CNC-5 |
-FIBER OPTIC |
Fiber optic
power scanning and virtual pivot point utilities |
Note: Old part number – Nfiber |
-GALVO-VCT
AND GRC |
Galvo
programming interface for vector-type marking applications; requires ScanLabs
RTC-4 Galvo control card |
Note: Old part number - Nmark-VCT or Nmark-GRC |
-DYNAMIC
CONTROLS TOOLBOX |
Includes
Harmonic Cancellation and Gain Scaling |
-ENHANCED
THROUGHPUT MODULE |
Includes
setup and monitoring screens of the ETM module; included in the price of the hardware
modules sold separately
|
Motion Composer (MC) Options |
-MOTION
DESIGNER |
The Motion
Designer is an add-on software component to the Digital Scope that provides
the ability to create, import, run, and evaluate motion profiles
(trajectories) |
Note: Old part number – A3200-MD |
|
-CNC
OPERATOR INTERFACE |
Man-machine
interface CNC software for Windows XP/Vista; includes user manuals, technical
manuals, and cable drawings for all related equipment |
Note: Old Part Number – Nview MMI |
|
-LABVIEW |
Includes
LABVIEW 8.2 VI samples
|
Maintenance |
-
MAINTENANCE |
First year
of maintenance is included with the initial purchase; additional years can be
purchased |
|
|
|
United
States [Change]
