LaserTurn® Laser Machining System Stage
Configuration |
-5 |
LaserTurn 5 Series base linear axis |
-2
|
LaserTurn 2 Series base linear
axis
|
Rotary Axis Configuration Option |
-ASR |
Rotary axis based on ASR1100/ASR1200 equivalent
stage |
-ACS |
Rotary axis based on ACS-150
equivalent stage
|
Travel Options |
-200 |
200 mm (7.87 in) linear axis travel |
-300 |
300 mm (11.81 in) linear axis
travel
|
Linear Encoder |
-LT20AS |
Linear encoder for 200 mm travel LaserTurn;
amplified sine output |
-LN20AS |
High accuracy, high-resolution
linear encoder for 200 mm travel LaserTurn; amplified sine
output |
-LT30AS |
Linear encoder for 300 mm travel
LaserTurn; amplified sine output |
-LN30AS |
High accuracy, high-resolution
linear encoder for 300 mm travel LaserTurn; amplified sine
output
|
Wet Cut (Optional) |
-WC |
LaserTurn 2 and LaserTurn 5 wet cut option;
valid only with ER16 and ER25 collets
|
Chuck Options |
-ER16 |
ER16 collet chuck; supports 0.5 mm to 10
mm tubing; available on LaserTurn 2 ASR and LaserTurn 5
ASR |
-ER25 |
ER25 collet chuck; supports 0.5
mm to 16 mm tubing; only available on LaserTurn 5 ACS |
-ER40 |
ER40 collet chuck; supports 16
mm to 30 mm tubing; only available on LaserTurn 5 ACS |
-3JC |
3-jaw gripper with 8 mm jaw stroke
and 20 mm clear aperture; only available on LaserTurn 5
ACS |
Front Tooling Options |
-FNTP |
No front tooling platform |
-FMTP |
Front tooling platform; metric
hole pattern |
-FUTP |
Front tooling platform; English
hole pattern |
-FMTP-AG |
Front tooling platform; metric
hole pattern; alignment and gripper assembly |
-FMTP-G |
Front tooling platform; metric
hole pattern; with gripper assembly |
-FUTP-AG |
Front tooling platform; English
hole pattern; alignment and gripper assembly |
-FUTP-G |
Front tooling platform; English
hole pattern; with gripper assembly
|
Rear Tooling Options |
-RNTP |
No rear tooling platform |
-RMTP |
Rear tooling platform; metric
tooling pattern |
-RUTP |
Rear tooling platform; English
tooling pattern
|
Gripper Jaws for Material Advance (Optional) |
-J0-10 |
Parallel gripper jaws; 0-10 mm diameter |
-J8-18 |
Parallel gripper jaws; 8-18 mm
diameter |
-J16-26 |
Parallel gripper jaws; 16-26
mm diameter |
-J24-34 |
Parallel gripper jaws; 24-34
mm diameter |
-J32-40 |
Parallel gripper jaws; 32-40
mm diameter
|
Pneumatics |
-PNG |
Air dryer/filter, regulators, solenoid valves
and relays for gripper and collet actuation |
-PN |
Air dryer/filter, regulator,
solenoid valve and relay for collet actuation
|
-FD |
Pneumatics assembly that includes a filter
and dryer assembly for conditioning of incoming air |
LaserTurn CADs |
Contact Aerotech factory for CADs
|
Limit Configuration* |
-NC |
Normally-closed end of travel limit switches
|
-NO |
Normally-open end of travel limit switches
|
Note:
Limit configuration option valid for LaserTurn 5 only. LaserTurn
2 only available in normally closed configuration.
|
