United States [Change]

Motion Control

About Aerotech

Sales Offices

Aerotech Products

Linear/Rotary
Combination Stages

Markets

Electronic Manufacturing

Engineering Reference

Software/Manuals

CADs/3D Models

Site Index

Laser Machining System

LaserTurn Series

Browse Laser/Medical Systems

Description

Specifications

Dimensions

Order Information

LaserTurn^® 2 ASR Series			Linear Axis		Rotary Axis
Travel			200 mm	300 mm	360° Continuous
Continuous Current, Stall		A _pk	5.05		10
		A _rms	3.57		7.1
Motor Type			BLMUC-92-A		BM250
Bus Voltage			Up to 320 VDC
Maximum Speed⁽¹⁾			2 m/s		600 rpm
Collet Type⁽²⁾			ER16
Maximum Aperture			10.0 mm (ER16-Dry Cut); 5.8 mm (ER16-Wet Cut)
Accuracy		LN	±5.0 µm (standard); ±1.0 µm (HALAR)⁽³⁾		±15.0 arc sec
		LT	±8.0 µm (standard); ±1.0 µm (HALAR)⁽³⁾	±12.0 µm (standard); ±1.0 µm (HALAR)⁽³⁾
Repeatability		LN	±0.5 µm		±3.0 arc sec
		LT	±0.5 µm
Straightness/Flatness (Max Deviation)	HALSF		±1.5 µm	±2.0 µm	NA
	Standard		±4.0 µm	±6.0 µm
Pitch			8.0 arc sec	12.0 arc sec	NA
Yaw			8.0 arc sec	12.0 arc sec	NA
Pin/Collet Runout⁽⁴⁾			NA		<25 µm
Max Load⁽⁵⁾			3.0 kg (Axial); 2.0 kg (Radial); 3 N-m (Moment)
Stage Mass With Tooling Platforms			26 kg	30 kg	NA
Minimum System Air Pressure⁽⁶⁾			100 psig
Finish			Black Hardcoat/Black Anodize (Stage/Body); Hardened 440C Stainless Steel/NiCoTef (Collet Chuck)

Note:
1. Maximum speed is based on stage capability. Actual speed may be limited by system data rate, resolution, or amplifier selection.
2. LaserTurn™ 2 ASR collet chuck accepts Rego-Fix ER collets manufactured to DIN6499 specifications only.
3. Available with Aerotech controllers.
4. Measured TIR of precision gage pin chucked with an ultraprecision ER collet (DIN6499) 10 mm away from collet face with no load.
5. Maximum loads are mutually exclusive. Loading limits are due to the collet chuck mechanism. Contact Aerotech directly if part load requirement exceeds specifications.
6. Collet chuck mechanism is normally-closed. Collet mechanism requires air to open collet chuck. Air supply must be dry (0º F dew point) oil-less air OR 99.99% pure nitrogen. Air or nitrogen must be filtered to 0.25 micron particle size or better.

LaserTurn^® 5 ASR Series		Linear Axis			Rotary Axis
Travel		200 mm	300 mm		360° Continuous
Continuous Current, Stall	A _pk	6.59			10
	A _rms	4.66			7.1
Motor Type		BLM-264-A			BM250
Bus Voltage		Up to 320 VDC
Maximum Speed⁽¹⁾		2 m/s			600 rpm
Collet Type⁽²⁾		ER16
Maximum Aperture		10.0 mm (ER16-Dry Cut); 5.8 mm (ER16-Wet Cut)
Accuracy	LN	±5.0 µm (standard); ±1.0 µm (HALAR)⁽³⁾			±15.0 arc sec
	LT	±8.0 µm (standard); ±1.0 µm (HALAR)⁽³⁾	±12.0 µm (standard); ±1.0 µm (HALAR)⁽³⁾
Repeatability	LN	±0.5 µm			±3.0 arc sec
	LT	±0.5 µm
Straightness/Flatness (Max Deviation)	HALSF	±1.0 µm	±1.5 µm		NA
	Standard	±2.0 µm	±3.0 µm
Pitch		8.0 arc sec	10.0 arc sec		NA
Yaw		8.0 arc sec	10.0 arc sec		NA
Pin/Collet Runout⁽⁴⁾		NA			<25 µm
Max Load⁽⁵⁾		3.0 kg (Axial); 2.0 kg (Radial); 3 N-m (Moment)
Stage Mass With Tooling Platforms		65 kg	69 kg	NA
Minimum System Air Pressure⁽⁶⁾		100 psig
Finish		Black Hardcoat/Black Anodize (Stage/Body); Hardened 440C Stainless Steel/NiCoTef (Collet Chuck)

Note:
1. Maximum speed is based on stage capability. Actual speed may be limited by system data rate, resolution, or amplifier selection.
2. LaserTurn™ 5 ASR collet chuck accepts Rego-Fix ER collets manufactured to DIN6499 specifications only.
3. Available with Aerotech controllers.
4. Measured TIR of precision gage pin chucked with an ultraprecision ER collet (DIN6499) 10 mm away from collet face with no load.
5. Maximum loads are mutually exclusive. Loading limits are due to the collet chuck mechanism. Contact Aerotech directly if part load requirement exceeds specifications.
6. Collet chuck mechanism is normally-closed. Collet mechanism requires air to open collet chuck. Air supply must be dry (0º F dew point) oil-less air OR 99.99% pure nitrogen. Air or nitrogen must be filtered to 0.25 micron particle size or better.

LaserTurn^® 5 ACS Series		Linear Axis			Rotary Axis
Travel		200 mm	300 mm		360° Continuous
Continuous Current, Stall	A _pk	6.59			3.4
	A _rms	4.66			2.4
Motor Type		BLM-264-A			S-130-60-A
Bus Voltage		Up to 320 VDC
Maximum Speed⁽¹⁾		2 m/s			300 rpm
Collet Type⁽²⁾		ER25, ER40
Maximum Aperture		0.05-16.0 mm (ER25); 16.0-30.0 mm (ER40)
Accuracy	LN	±5.0 µm (standard); ±1.0 µm (HALAR)⁽³⁾			±30.0 arc sec (standard); ±5.0 arc sec (HALAR)^(3),⁽⁴⁾
	LT	±8.0 µm (standard); ±1.0 µm (HALAR)⁽³⁾	±12.0 µm (standard); ±1.0 µm (HALAR)⁽³⁾
Repeatability	LN	±0.5 µm			±6.0 arc sec (standard); ±3.0 arc sec (HALAR)^(3),⁽⁴⁾
	LT	±0.5 µm
Straightness/Flatness (Max Deviation)	HALSF	±1.0 µm	±1.5 µm		NA
	Standard	±2.0 µm	±3.0 µm
Pitch		8.0 arc sec	10.0 arc sec		NA
Yaw		8.0 arc sec	10.0 arc sec		NA
Pin/Collet Runout⁽⁵⁾		NA			<25 µm
Max Load⁽⁶⁾	ER25	10.0 kg (Axial); 5.0 kg (Radial); 6 N-m (Moment)
	ER40	15.0 kg (Axial); 10.0 kg (Radial); 12 N-m (Moment)
Stage Mass With Tooling Platforms		70 kg	75 kg	NA
Minimum System Air Pressure⁽⁷⁾		100 psig
Finish		Black Hardcoat/Black Anodize (Stage/Body); Hardened 440C Stainless Steel/NiCoTef (Collet Chuck)

Note:
1. Maximum speed is based on stage capability. Actual speed may be limited by system data rate, resolution, or amplifier selection.
2. LaserTurn™ 5 ACS collet chuck accepts Rego-Fix ER collets manufactured to DIN6499 specifications only. The collet type (ER25 or ER40) must be specified at the time of order.
3. Available with Aerotech controllers.
4. Requires HALAR and part programming as rotary axis.
5. Measured TIR of precision gage pin chucked with an ultraprecision ER collet (DIN6499) 10 mm away from collet face with no load.
6. Maximum loads are mutually exclusive. Loading limits are due to the collet chuck mechanism. Contact Aerotech directly if part load requirement exceeds specifications.
7. Collet chuck mechanism is normally-closed. Collet mechanism requires air to open collet chuck. Air supply must be dry (0º F dew point) oil-less air OR 99.99% pure nitrogen. Air or nitrogen must be filtered to 0.25 micron particle size or better.

Downloads

  PDF File
  CAD Drawing
  Manual

Similar Products

VascuLathe

Supporting Products

Motion Controllers

| | | | | | |

Aerotech is a motion controller and motion control systems manufacturer.