VascuLathe® ACS/ASR Series |
VascuLathe® |
Direct-drive cylindrical laser
machining system with integrated material handling system
|
Rotary Axis Configuration |
-ACS |
ACS based rotary stage with support for
ER25 or ER40 collet configurations |
-ASR |
ASR based rotary stage with support
for ER16 collet configuration
|
-ASR-L |
ASR based rotary stage with support for ER16
collet configuration with cable tray on the left side (as
viewed from the front) |
Travel Options |
-200S |
200 mm (7.87 in) linear axis travel |
-200C |
200 mm (7.87 in) linear axis
travel; protective CMS cover |
-300S |
300 mm (11.81 in) linear axis
travel |
-300C |
300 mm (11.81 in) linear axis
travel; protective CMS cover
|
Chuck Options |
-NC-ER16 |
Normally-closed ER16 collet closer; supports tube
sizes from 0.5 mm to 10 mm (ASR, ACS) |
-ER25 |
ER25 collet closer; supports tube sizes
from 0.5 mm to 16 mm (ACS only) |
-ER40 |
ER40 collet closer; supports tube sizes
from 15.5 mm to 30 mm (ACS only)
|
Configuration Options |
-WC |
Wet cutting option; rated for
100 psi fluid pressure; includes internal seal and water
jacket/pressure vessel connection at rear of spindle assembly
(only available with the VascuLathe®-ACS-ER25 and VascuLathe®-ASR) |
-AG |
Bushing alignment assembly with
manual Y/Z adjustment and pneumatic activated integral tube
clamp/advance mechanism |
-G |
Pneumatic activated tube clamp/advance mechanism |
-PN |
Pneumatics assembly for VascuLathe
w/o gripper; includes filter, drier, pneumatic hosing, and
solenoid valve and solid state relay to actuate ER collet |
-PNG |
Pneumatics assembly for VascuLathe
w/o gripper; includes filter, drier, pneumatic hosing, and
solenoid valves and solid state relays to actuate ER collet
and gripper
|
-FD |
Pneumatics assembly that includes a filter
and dryer assembly for conditioning of incoming air |
Gripper Jaw Options |
-J0-10 |
Gripper jaws with offsets to grip from 0-10
mm tube diameter |
-J8-18 |
Gripper jaws with offsets to
grip from 8-18 mm tube diameter |
-J16-26 |
Gripper jaws with offsets to
grip from 16-26 mm tube diameter |
-J24-34 |
Gripper jaws with offsets to
grip from 24-34 mm tube diameter |
-J32-40 |
Gripper jaws with offsets to
grip from 32-40 mm tube diameter
|
Water Jacket Seal |
Consult factory for range of
supported tube diameters for water jacket seal assemblies
|
ER Collets(1) |
Consult factory for range of
available ER collets |
(1)Requires
Rego-Fix electropolished collet for correct operation.
|
Controller Options |
-Ndrive HP |
Two-axis A3200 control system with Nview MMI and Ndrive
HP-IOPSO-DUALPSO-AUXPWR-MXH panel-mount digital networked
drives; includes all motor power and feedback cabling |
| |
|
-Ndrive HL |
Two-axis A3200 control system with Nview
MMI and Ndrive HL-IOPSO-DUALPSO-AUXPWR-MXH panel-mount digital
networked drives; includes all motor power and feedback
cabling |
| |
|
-Npaq |
Two-axis A3200 control system with Nview
MMI and Npaq-DL4010-MXR2-DUALPSO-ESTOP1 19 inch rack-mount
digital networked drive chassis; includes all motor power
and feedback cabling |
| |
|
Note:
See A3200 product documentation for additional information
on controller and drives.
|
