AMG
LP Direct-Drive Motorized Gimbal |
AMG-100LP |
103 mm cell ID; mirror CG is at the center
of rotation; mirror face offset forward of the rotation
intersection of AZ/EL 8.5 mm; AZ 10000 line encoder, EL
3600 line encoder; one 25-pin D feedback and one high-power
D motor cable required for AZ; one combined motor power
and feedback cable is required for EL |
AMG-150LP |
154 mm cell ID; mirror CG is at the center
of rotation; mirror face offset forward of the rotation
intersection of AZ/EL 12.7 mm; AZ 10000 line encoder,
EL 3600 line encoder; one 25-pin D feedback and one high-power
D motor cable required for AZ; one combined motor power
and feedback cable required for EL |
AMG-200LP |
205 mm cell ID; mirror CG is
at the center of rotation; mirror face offset forward
of the rotation intersection of AZ/EL 16.9 mm; AZ/EL 10000
line encoder; two 25-pin D feedback and two high-power
D motor cables required |
Position Transducer
|
AMG-100LP/150LP
|
-AS |
Standard feedback device, 1 Vpp sine wave
output; 10,000 cycles per rev on AZ, 3600 cycles per rev
on EL (with 2000x multiplication, post-quad, AZ 0.32 µrad,
EL 0.87 µrad) |
-X5 |
TTL output encoder with AZ 125.6
µrad resolution, EL 349.1 µrad; requires a
controller with a minimum 16 MHz encoder sample rate |
-X10 |
TTL output encoder with AZ 63
μrad resolution, EL 174.5 μrad; requires a controller
with a minimum 16 MHz encoder sample rate |
-X25 |
TTL output encoder with AZ 25.2
μrad resolution, EL 69.8 μrad; requires a controller
with a minimum 16 MHz encoder sample rate |
-X50 |
TTL output encoder with AZ 12.6
μrad resolution, EL 34.9 μrad; requires a controller
with a minimum 16 MHz encoder sample rate |
AMG-200LP
|
-AS |
Standard feedback device, 1 Vpp
sine wave output; 10,000 cycles per rev on AZ and EL (with
2000x multiplication, post-quad, AZ/EL 0.32 μrad)
|
-X5 |
TTL output encoder with AZ and
EL 125.6 μrad resolution; requires a controller with
a minimum 16 MHz encoder sample rate |
-X10 |
TTL output encoder with AZ and
EL 63 μrad resolution; requires a controller with
a minimum 16 MHz encoder sample rate |
-X25 |
TTL output encoder with AZ and
EL 25.2 μrad resolution; requires a controller with
a minimum 16 MHz encoder sample rate |
-X50 |
TTL output encoder with AZ and
EL 12.6 μrad resolution; requires a controller with
a minimum 16 MHz encoder sample rate |
Stage Construction Options
|
/VAC3 |
Vacuum preparation of stage to 10-3
torr |
/VAC6 |
Vacuum preparation of stage to
10-6 torr |
AMG-100LP Accessories
|
AOM4T3 |
3-inch mirror cell adapter
|
|
|
|
