ACS LP Series Direct-Drive
Rotary Stage |
ACS
|
Direct-drive rotary stage with integral pneumatic collet
chuck
|
Frame Size and Fixture
Type |
-100LP
|
100 mm wide direct-drive rotary stage with 1.8 N-m peak
torque output and integral rotary union, air-actuated ER8*
collet holder, normally closed, supports tube diameters
from 0.7 mm to 5 mm
|
| |
|
-150LP |
150
mm wide direct-drive rotary stage with 11.7 N-m peak torque
output and integral rotary union, air-actuated ER25* collet
holder, normally closed, supports tube diameters from 1
mm to 16 mm |
| |
|
-200LP |
200
mm wide direct-drive rotary stage with 30 N-m peak torque
output and integral rotary union, air-actuated ER40* collet
holder, normally closed, supports tube diameters from 16
mm to 30 mm; payloads >24.5 mm can extend no more than 70 mm below top of collet
|
| |
|
*Note:
Collet holder requires dry (0° C dew point), oil-less, filtered
air (0.25 micron) or 99.99% pure filtered nitrogen (0.25
micron).
|
Winding Options |
-A
-B
|
Standard motor winding
Optional motor winding (consult Aerotech for availability)
|
Position Transducer |
-AS |
Standard
feedback device; 1 Vpp sine wave output; 360 arc sec resolution
on ACS-100LP and 240 arc sec on ACS-150/200LP |
| |
|
-X5** |
Square
wave digital output; 18 arc sec resolution on ACS-100LP
and 6 arc sec resolution on
ACS-150/200LP |
-X10** |
Square
wave digital output; 9 arc sec resolution on ACS-100LP and
3 arc sec resolution on
ACS-150/200LP |
-X25** |
Square
wave digital output; 3.6arc sec resolution on ACS-100LP
and 2.4 arc sec resolution on
ACS-150/200LP |
-X50** |
Square
wave digital output; 1.8 arc sec resolution on ACS-100LP
and 1.2 arc sec resolution on
ACS-150/200LP |
**Note:
Requires a controller with a 16 MHz encoder sample rate. |
| |
|
Construction Options |
-WRENCH SET
|
Spanner wrench for changing ER collets
|
-XMM |
DIN6499
AA collet. Consult factory for available sizes |
