|
ALAR Series Direct-Drive, Large Aperture, Rotary
Stages |
| -100-LP |
65 mm high direct-drive rotary stage with
100 mm clear aperture, dual precision bearings, 2.0 N-m
continuous torque,and 31488 line amplified sine encoder
|
| -100-SP |
100 mm high direct-drive rotary
stage with 100 mm clear aperture, dual precision bearings,
5.9 N-m continuous torque, and 31488 line amplified sine
encoder |
| -150-LP |
65 mm high direct-drive rotary
stage with 150 mm clear aperture, dual precision bearings,
2.5 N-m continuous torque, and 36000 line amplified sine
encoder |
| -150-SP |
100 mm high direct-drive rotary
stage with 150 mm clear aperture, dual precision bearings,
10.7 N-m continuous torque, and 40000 line amplified sine
encoder |
| -200-LP |
100 mm high direct-drive rotary
stage with 200 mm clear aperture, dual precision bearings,
13.1 N-m continuous torque, and 47200 line amplified sine
encoder |
| -200-SP |
150 mm high direct-drive rotary
stage with 200 mm clear aperture, dual precision bearings,
13.1 N-m continuous torque, and 55040 line amplified sine
encoder |
| -250-LP |
100 mm high direct-drive rotary
stage with 250 mm clear aperture, dual precision bearings,
14.2 N-m continuous torque, and 55040 line amplified sine
encoder |
| -250-SP-2 |
150 mm high direct-drive rotary
stage with 250 mm clear aperture, dual precision bearings,
14.2 N-m continuous torque, and 64800 line amplified sine
encoder |
| -250-SP-3 |
150 mm high direct-drive rotary
stage with 250 mm clear aperture, dual precision bearings,
21.4 N-m continuous torque, and 64800 line amplified sine
encoder |
| -325-LP |
100 mm high direct-drive rotary
stage with 325 mm clear aperture, dual precision bearings,
23.7 N-m continuous torque, and 64800 line amplified sine
encoder |
| -325-SP-2 |
160 mm high direct-drive rotary
stage with 325 mm clear aperture, dual precision bearings,
23.7 N-m continuous torque, and 74612 line amplified sine
encoder; NOTE: The 325-SP is limited travel only. It must
include the -LT and -LI limit options below. |
| -325-SP-3 |
160 mm high direct-drive rotary
stage with 325 mm clear aperture, dual precision bearings,
35.6 N-m continuous torque, and 74612 line amplified sine
encoder; NOTE: The 325-SP is limited travel only. It must
include the -LT and -LI limit options below. |
| NOTE:
-SP is for horizontal or vertical axis applications; -LP
is for vertical axis applications.
|
Encoder
Type |
| -CT Continuous
Travel Internal Encoder |
| -LT Limited
Travel Internal Encoder
|
|
Encoder Output Options |
| -AS |
Standard feedback device; 1 Vpp sine wave
output; multiply the selected stage resolution by the encoder
multiplier to get final resolution of counts per rev |
| -X5 |
Square-wave digital output which
includes a 5-times multiplier; multiply the selected stage
encoder lines by 5 to get the final resolution of counts
per rev |
| -X10 |
Square-wave digital output which
includes a 10-times multiplier; multiply the selected stage
encoder lines by 25 to get the final resolution of counts
per rev |
| -X25 |
Square-wave digital output which
includes a 25-times multiplier; multiply the selected stage
encoder lines by 25 to get the final resolution of counts
per rev |
| -X50 |
Square-wave digital output which
includes a 50-times multiplier; multiply the selected stage
encoder lines by 50 to get the final resolution of counts
per rev
|
|
Limit Options |
| -UNLIMITED |
No travel limits or hardstops; valid only
with -CT encoder type |
| -LIx |
Normally-closed limits at x degrees
total travel, where x = 10/20/30/60/90/120/180/240/300/340;
integrated hardstops 5 degrees past LI limit switch angles;
other travel angles available by special order; increases
stage height by 10 mm; can be used with -CT or -LT encoder
types; ALAR-250 and ALAR-325 hardstops are special order
only; contact the factory for pricing
|
|
Miscellaneous Options |
| -BK |
Holding brake (custom engineering
special order) |
|
|
|
United
States [Change]
