United States [Change]

Motion Control

About Aerotech

Sales Offices

Aerotech Products

Linear/Rotary
Combination Stages

Markets

Electronic Manufacturing

Engineering Reference

Software/Manuals

CADs/3D Models

Motion Control Videos

Site Index

ATS5000 Linear Stages

ATS5000

Browse Linear Stages

Basic Model			ATS50030	ATS50045	ATS50060	ATS50075	ATS50090	ATS50100
Total Travel			300 mm	450 mm	600 mm	750 mm	900 mm	1000 mm
Drive System			Super-Precision Ground Ball Screw/Brushless Servomotor (BM250-MS-E1000H)
Bus Voltage			Up to 320 VDC
Continuous Current		A_pk	Up to 10.5 A
		A_rms	Up to 7.4 A
Feedback			Noncontact Rotary Encoder (1000 line)
Resolution	4 mm/rev Lead		1.0 µm (40 µin) @ 4000 steps/rev Motor Resolution
	0.2 in/rev Lead		1.25 µm (50 µin) @ 4000 steps/rev Motor Resolution
	LN Linear Encoder		0.001 µm - 0.2 µm (0.04 µin - 8 µin)
	LT Linear Encoder		0.005 µm - 1.0 µm (0.2 µin - 40 µin)
Maximum Travel Speed⁽¹⁾	4 mm/rev Lead		250 mm/s (10 in/s)			200 mm/s (8 in/s)
	0.2 in/rev Lead		300 mm/s (12 in/s)			250 mm/s (10 in/s)	200 mm/s (8 in/s)
Maximum Load	Horizontal		135.0 kg (300 lb)
	Vertical		45.0 kg (100 lb)
	Side		45.0 kg (100 lb)
Accuracy	Ball Screw	HALAR⁽³⁾	±1.0 µm (±40 µin)	±1.5 µm (±60 µin)	±2.0 µm (±80 µin)	±2.0 µm (±80 µin)	±3.0 µm (±120 µin)	±3.0 µm (±120 µin)
		Standard	+0.0, -12.0 µm (+0, -480 µin)	+0.0, -18.0 µm (+0, -720 µin)	+0.0, -24.0 µm (+0, -960 µin)	+0.0, -30.0 µm (+0, -1200 µin)	+0.0, -36.0 µm (+0, -1280 µin)	+0.0, -36.0 µm (+0, -1440 µin)
	LN	HALAR⁽³⁾	±1.0 µm (±40 µin)
		Standard	±5.0 µm (±200 µin)
	LT	HALAR⁽³⁾	±1.0 µm (±40 µin)
		Standard	±12.0 µm (±480 µin)	±18.0 µm (±720 µin)	±24.0 µm (±960 µin)	±30.0 µm (±1200 µin)	±36.0 µm (±1440 µin)	±40.0 µm (±1600 µin)
Repeatability (Bidirectional)	Ball Screw	HALAR⁽³⁾	±0.5 µm (±20 µin)
		Standard	±1.0 µm (±40 µin)
	LN		±0.5 µm (±20 µin)
	LT		±0.5 µm (±20 µin)
Straightness and Flatness	Differential	HALSF	1.0 µm/25 mm (40 µin/in)
		Standard	2.0 µm/25 mm (80 µin/in)
	Maximum Deviation	HALSF	±1.5 µm (±60 µin)	±2.5 µm (±100 µin)	±3.0 µm (±120 µin)	±3.5 µm (±140 µin)	±4.5 µm (±180 µin)	±5.0 µm (±200 µin)
		Standard	±3.0 µm (±120 µin)	±4.0 µm (±160 µin)	±6.0 µm (±240 µin)	±7.0 µm (±280 µin)	±8.0 µm (±320 µin)	±9.0 µm (±360 µin)
Pitch and Yaw			10 arc sec	14 arc sec	17 arc sec	20 arc sec	25 arc sec	25 arc sec
Nominal Stage Weight	Less Motor		35.0 kg (77 lb)	42 kg (93 lb)	50 kg (109 lb)	62 kg (136 lb)	68 kg (148 lb)	72 kg (159 lb)
	With Motor		39.0 kg (85 lb)	46 kg (101 lb)	54 kg (117 lb)	66 kg (144 lb)	71 kg (156 lb)	76 kg (167 lb)
Construction			Aluminum Body/Stage; Hardcoated Table (62 Rockwell Hardness); Textured Epoxy (Polane-T) Pebble Grey Paint

Notes:
1. Excessive duty cycle may impact stage accuracy.
2. Payload specifications are for single-axis system and based on ball screw and bearing life of 2500 km (100 million inches) of travel.
3. Available with Aerotech controllers.
4. Specifications are for single-axis systems, measured 50 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.

Downloads

  PDF File
  CAD Drawing
  Manual

Similar Products

ATS2000
ALS5000

Supporting Products

  Soloist
  Ensemble
  A3200
  Ndrive

| | | | | | | |

Aerotech is a motion controller and motion control systems manufacturer.