The PRO165-HS is a medium performance, entry-level
linear stage and comes with a 20 mm/rev ball screw for
high-speed applications requiring up to 1200 mm/s. It is
similar in design to the PRO115-HS series, providing
additional load carrying capability with larger bearings and
a wider cross-section.
Rugged Construction
The hard-cover design provides protection from debris. The robust
aluminum cover is hard-coated providing a scratch-resistant surface.
The side seals keep dirt and particulates out of the stage and
protect the bearing surfaces from contamination. The
vertical orientation of the seals easily deflects debris away
from the stage. The tabletop can be outfitted with an
optional brush assembly to remove any particles that collect
on the hard cover. Competitive top-seal designs can ingest
debris in the seal, resulting in the eventual failure and
replacement of the sealing mechanism.
NEMA 23 Motor Support
The PRO165-HS has a NEMA 23 motor flange mounting
interface and can be ordered with an Aerotech standard
brushless rotary motor installed. Alternatively, the stage can
be ordered without a motor for the attachment of third-party
DC brush, brushless, or stepper motors.
Highly Configurable
The stage is equipped with a ground 20 mm/rev ball screw
for high-speed applications, and can be outfitted with
English or metric bolt-hole pattern tabletops. A stage
mounted brake option is available to prevent back-driving
the screw when power is removed from the servomotor. A
fold-back kit is also available to effectively reduce the
overall stage length for space-constrained applications.
|
