The PRO225-HS is a medium performance linear stage from Aerotech
that comes with a 25 mm/rev ball screw for high-speed applications
requiring up to 1400 mm/s. It is similar in design to the PRO165
series, providing additional load carrying capability with larger
bearings and a wider cross-section.
Rugged Construction
The hard-cover design provides protection from debris. The
robust aluminum cover is hard-coated providing a scratch-resistant surface.
The side seals keep dirt and particulates out of the stage and
protect the bearing surfaces from contamination. The
vertical orientation of the seals easily deflects debris away
from the stage. The tabletop can be outfitted with an
optional brush assembly to remove any particles that collect
on the hard cover. Competitive top-seal designs can ingest
debris in the seal, resulting in the eventual failure and
replacement of the sealing mechanism.
NEMA 23 Motor Support
The PRO225 has a NEMA 23 motor flange mounting
interface and can be ordered with an Aerotech standard
brushless rotary motor installed. Alternatively, the stage can
be ordered without a motor for the attachment of third-party
DC brush, brushless, or stepper motors.
Highly Configurable
The stage is equipped with a ground 25 mm/rev ball screw for all
your high-speed applications, and can be outfitted with English
or metric bolt-hole pattern tabletops. A motor-mounted brake option
is available to prevent back-driving the screw when power is removed
from the servomotor, and a fold-back kit is also available to
effectively reduce the overall stage length for space-constrained
applications.
|
