Ndrive HPe PWM Digital Amplifier

Description

Design Features

  • Wide output power range from 10 A peak to 200 A peak at 320 VDC
  • 3-phase AC line input
  • CE approved and NRTL safety certification; follows the 2011/65/EU RoHS 2 Directive
  • PWM power stages
  • Digital current, velocity, and position loops for improved motion stability
  • Optional integrated encoder multiplier for higher throughput and reduced wiring
  • Flexible design provides ability to drive brushless and DC brush-type servomotors as well as stepping motors
  • Encoder or resolver feedback

The Ndrive® family of digital servo amplifiers are high performance discrete drives used with the Automation 3200 motion controller. These drives are capable of controlling brushless, DC brush, and stepper motors over a wide range of operating voltages and currents. Based on a common architecture, Ndrive amplifiers perform both current- and position-loop closures digitally.

The use of high-performance double-precision processors allows these drives to generate ultra-smooth motion profiles. Servo system response is optimized with the use of up to eight second-order loop-shaping filters, precise time-aligned feed-forward and other proprietary techniques with loop closure rates up to 20 kHz.

The Ndrive family is offered in a number of highly efficient PWM versions. The Ndrive MP is a low power, small footprint PWM drive ideal for space-sensitive applications. The Ndrive CP is a medium-power PWM drive capable of running directly from AC mains voltage and is optimized for cost-sensitive applications. The Ndrive HPe is the highest performance PWM drive providing a host of features not available on the other PWM drives, and is available in output current ranges from 10 A to 200 A peak.

Options for the Ndrive family include integral encoder interpolation, one- to three-axis position synchronized output (PSO), automatic brake control, digital and analog I/O expansion, absolute encoder interface, and one- or two-channel resolver interfaces. An optional dedicated ethernet port is available on the HPe drives for connection to third-party I/O expansion devices. This provides the potential to connect to a large number of I/O points typically required for PLC-type applications.

Any combination of Ndrive amplifiers may be connected to the Automation 3200 FireWire® network, allowing the system to be customized as needed.

Specifications

Ndrive HPe Specifications

Ndrive HPeUnits1020305075100150200
Motor Style Brush, Brushless, Stepper(1)
Motor Supply VAC Single-Phase 7-240 V; 50/60 Hz Single- or Three-Phase 115 or 230 V; 50/60 Hz
Control Supply(2) VAC 85-240 VAC; 50/60 Hz
Bus Voltage(3) VDC 10-320(3)
Peak Output Current (1 sec)(4) Apk 10 20 30 50 75 100 150 200
Continuous Output Current(4) Apk 5 10 10 25 37 50 75 100
Digital Inputs 6 Optically Isolated (2 High Speed)
Digital Outputs 4 Optically Isolated
Analog Inputs One 16-bit Differential; ±10 V
Analog Outputs One 16-bit Single-Ended; ±10 V
Dedicated Axis I/O on Feedback Connector Three Limit Inputs (CW, CCW, Home); Three Hall Effect Inputs (A, B, C); Three High-Speed differential Inputs (sin, cos, mkr for encoder); Motor Over-Temperature Input
Dedicated I/O on Auxiliary Feedback Connector sin, cos, mkr for Aux Enc; Aux Enc can be used for PSO Output
I/O Expansion Board(5) 16/16 Digital Opto-Isolated; 3 Analog In (±10 V, 16-bit Differential); 3 Analog Out (±10 V, 16-bit)
High Speed Data Capture Yes (50 ns Latency)
Automatic Brake Control Standard; 24 V at 1 A
Emergency Stop Sense Input (ESTOP)(6) Standard; 24 V Opto-Isolated
Position Synchronized Output (PSO) Single Axis Standard, Two/Three Axis Optional
Can Output Multiplied Encoder Yes
Can Output Square Wave Encoder Yes
Primary Encoder Input Frequency 500 kHz Amplified Sine Wave Standard (for onboard multiplier); 40 MHz TTL Square Wave
Secondary Encoder Input Frequency 32 MHz Square Wave
Encoder Multiplication Up to x65536 with real-time quadrature output (MXH)
Absolute Encoder Renishaw Resolute BiSS; EnDat 2.1; EnDat 2.2
Resolver Interface Optional; 1 or 2 Channel; 16-bit
Internal Shunt Resistor 40 W Continuous; 400 W Peak (5 seconds) 440 W Continuous
External Shunt Optional
Ethernet Optional
USB No
RS-232 No
FireWire Yes
Fieldbus Modbus TCP on PC
Current Loop Update Rate kHz 20
Servo Loop Update Rate kHz 8
Power Amplifier Bandwidth kHz Selectable Through Software
Minimum Load Inductance mH 0.1 @ 160 VDC (1.0 mH @ 320 VDC)
Operating Temperature °C 0 to 50
Storage Temperature °C -30 to 85
Weight kg (lb) 2.36 (5.2) 6.64 (14.6) 11.06 (24.4)
Standards CE approved, NRTL safety certification, 2011/65/EU RoHS 2 Directive
  1. For stepper motors only, one-half of bus voltage is applied across the motor (e.g., 80 VDC supply results in 40 VDC across stepper motor).
  2. "Keep Alive" supply.
  3. Output voltage dependent upon input voltage.
  4. Peak value of the sine wave; rms current for AC motors is 0.707 * A pk.
  5. Requires I/O option.
  6. Requires external relay to remove motor supply power.

Dimensions

  • Ndrive HPe10/20/30
  • Ndrive HPe10/20/30 with Optional I/O
  • Ndrive HPe50/75/100 with Optional I/O
  • Ndrive HPe150/200 with Optional I/O

Ordering Information

Please go here for ordering information.