- Travels to 240 μm x 240 μm x 25 μm
- Large square clear aperture up to 66 mm x 66 mm
- Superior multi-axis accuracy via parallel kinematic design
- High stiffness and dynamics resulting in high process throughput
- High-precision, frictionless flexure guidance
- Patent-pending design provides unmatched geometric performance
- Long device lifetime
- Superior positioning resolution and linearity with direct-metrology capacitive sensor option
- Open-loop and vacuum versions
Aerotech’s QNP3 Series of XYZ parallel kinematic piezo positioning stages combines sub-nanometer resolution, high dynamics, and excellent geometric performance in a compact low-profile package. The QNP3 series piezo stages come standard with a large, clear aperture with closed-loop travels up to 200 µm x 200 µm x 20 µm (open-loop travels to 240 µm x 240 µm x 25 µm). The design is ideal for optical and scanning probe microscopy or other inspection or manufacturing applications where two-sided part access is required with three DoF manipulation.
Precision Parallel-Kinematic Design
The QNP3 piezo stages employ a parallel-kinematic flexure and metrology design that ensures the highest levels of multi-axis accuracy. Guided by precision flexures which are FEA-optimized to ensure high stiffness and long device life, the QNP3 stages offer best-in-class stiffness and resonant frequency enabling high process throughput and fast closed-loop response.
Using a patent-pending drive design, X and Y yaw errors are minimized while still maintaining an Abbe-compliant metrology system. This design results in unmatched positioning performance over the entire XY travel space. Z-axis actuators and capacitive sensors are designed to provide Abbe-compliant feedback in the vertical direction with minimal geometric errors.
All QNP3 piezo stages are available with closed-loop feedback (-C) or open-loop (no feedback). The unique capacitive sensor parallel-metrology design measures the output of the positioning carriage, directly enabling sub-nanometer resolution, linearity errors below 0.01%, and single-digit nanometer repeatability.
When coupled with Aerotech’s Q-series controllers and drives, the QNP3 stages demonstrate sub-nanometer positioning resolution, in-position stability (jitter), and high positioning bandwidth. Software options such as Aerotech’s Dynamic Controls Toolbox and Motion Designer packages provide a host of advanced yet easy-to-use tools such as Learning Control, Harmonic Cancellation, and Command Shaping, providing improved tracking errors and faster step-and-settle times. OEM drive options are also available. Aerotech’s controller architecture easily enables high-speed, tightly-controlled coordinated motion between piezo stages, servos, steppers, and galvos.
An optional mounting plate provides direct mounting English or metric breadboard optical tables. A solid tabletop option is also available. QNP3 piezo stages are available in custom materials and vacuum-prepared versions upon request.
|Closed-Loop Travel (X x Y x Z)||30 μm x 30 μm x 10 μm||100 µm x 100 µm x 10 µm||200 um x 200 um x 20 um|
|Open-Loop Travel, -30 to +150 V(1)||36 μm x 36 μm x 12 μm||120 µm x 120 µm x 12 µm||240 um x 240 um x 25 um|
|Resolution(2)||Closed-Loop||0.1 nm (XY); 0.15 nm (Z)||0.30 nm (XY); 0.15 nm (Z)||0.4 nm (XY), 0.15 nm (Z)|
|Open-Loop||0.03 nm (XY); 0.05 nm (Z)||0.15 nm (XY); 0.05 nm (Z)||0.2 nm (XY), 0.1 nm (Z)|
|Linearity(3,4)||0.02% (XY); 0.04% (Z)||0.01% (XY); 0.02% (Z)||0.01% (XY); 0.02% (Z)|
|Bidirectional Repeatability(5)||4 nm (XY); 3 nm (Z)||2 nm (XY); 1 nm (Z)||2 nm (XY); 2 nm (Z)|
|Straightness||25 nm (XY); 50 nm (Z)||<10 nm (XY); <20 nm (Z)||10 nm (XY); 40 nm (Z)|
|2D Flatness (Over Full XY Travel)||10 nm||<5 nm||<10 nm|
|Pitch||10 μrad (2.1 arc sec) (XY)
6 μrad (1.2 arc sec) (Z)
|2 µrad (0.4 arc sec) (XY); 6 µrad (1.2 arc sec) (Z)||2 urad (0.4 arcsec) (XY); 6 urad (1.2 arcsec) (Z)|
|Yaw||5 μrad (1 arc sec) (XY)
5 μrad (1 arc sec) (Z)
|10 µrad (2.1 arc sec) (XY); 5 µrad (1 arc sec) (Z)||20 urad (4 arcsec) (XY); 6 urad (1.2 arcsec) (Z)|
|Stiffness (in direction of motion)(6)||10 N/μm (XY); 25 N/μm (Z)||1.9 N/µm (XY); 13 N/µm (Z)||1.3 N/µm (XY); 8.7 N/um (Z)|
|Unloaded Resonant Frequency(6)||1850 Hz (XY); 2200 Hz (Z)||490 Hz (XY); 1425 Hz (Z)||330 Hz (XY); 910 Hz (Z)|
|Resonant Frequency (200 gram load)(6)||950 Hz (XY); 1390 Hz (Z)||350 Hz (XY); 910 Hz (Z)||260 Hz (XY); 670 Hz (Z)|
|Max Payload(7)||1 kg||1 kg||3 kg|
|Max Acceleration (Unloaded)(8)||400 m/s2 (XY); 2000 m/s2 (Z)||115 m/s2 (XY); 2000 m/s2 (Z)||35 m/s2 (XY); 1000 m/s2|
|Moving Mass (Unloaded)||0.24 kg (XY); 0.05 kg (Z)||0.21 kg (XY); 0.05 kg (Z)||0.58 kg (XY); 0.10 kg|
|Stage Mass||0.53 kg||0.56 kg||1.3 kg|
|Material||Anodized aluminum(9)||Anodized aluminum(9)||Anodized aluminum(9)|
|MTBF (Mean Time Between Failure)||30,000 Hours||30,000 Hours||30,000 Hours|
- Value ±10%.
- See Piezo Engineering reference section 4.2 for description of resolution.
- Certified with each stage (closed-loop feedback models only).
- Measured approximately 15 mm above the carriage by an external metrology device. See Piezo Engineering reference section 4.1 for description of linearity and accuracy specifications.
- Specified as a 1 sigma (standard deviation) value (closed-loop feedback models only). See Piezo Engineering reference section 4.3 for description of bidirectional repeatability.
- Values ±20%.
- On-axis loading listed.
- Max acceleration listed is the stage mechanical limitation. Achievable accleration is a function of amplifer selection and move parameters.
- External elements are anodized aluminum. Some stainless steel components are used in the internal construction. Other materials upon request.
- Specifications listed are per axis unless specified.
|Drive System||Piezo Multi-Layer Stack Actuator|
|Feedback||Closed Loop: Capacitive Sensor (-C)
Open Loop: None (-)
|Maximum Voltage||-30 V to +150 V|
|Piezo Stack Capacitance(1)||4.6 μF (per axis) (XY); 2 μF (Z)||3.2 µF (XY, per axis); 2 µF (Z)||6.4 uF (XY, per axis); 4.8 uF (Z)|
- Value ±20%
- Unless noted, the QLAB, QDe, or QLe drives are required to achieve the listed specifications. Contact Aerotech for specifications when used with the QL drives.
QNP3 Series Two-Axis XYZ Piezo Nanopositioning Stage
|QNP3-100XYAZ-030-10||QNP3 three-axis XYZ piezo nanopositioning stage, 30 μm x 30 μm x 10 μm closed-loop travel|
|QNP3-100XYAZ-100-10||QNP3 three-axis XYZ piezo nanopositioning stage, 100 µm x 100 µm x 10 µm closed-loop travel|
|QNP3-150XYAZ-200-20||QNP3 three-axis XYZ piezo nanopositioning stage, 200 µm x 200 µm x 20 µm closed-loop travel|
|-C||Capacitance sensor feedback|
Mounting Plate (Optional)
|-MP||Mounting plate for English and metric optical breadboard tables|
|-TT1||Solid metric tabletop, covers aperture|
Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system.
|-TAS||Integration - Test as system
Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration.
|-TAC||Integration - Test as components
Testing and integration of individual items as discrete components that ship together. This is typically used for spare parts, replacement parts, or items that will not be used together. These components may or may not be part of a larger system.