- High-load lift stage with aperture
- Submicron closed-loop positioning
- Excellent pitch and yaw characteristics over full travel
- 5 mm or 10 mm travel; custom designs for alternate travels available
- Optional cleanroom and ESD protection
- Precision-ground ball screw for high performance
Aerotech’s AVS1000 series stages offer the ideal solution for applications that require moving large or heavy loads over very small incremental movements in elevation above a horizontal plane. Low profiles and precise motion capability make these stages ideal for use in semiconductor manufacturing and inspection, automated tool alignment, machine vision inspection systems and laser machining applications.
Quality Design Provides Superior Performance
The AVS1000 series provides precise elevation of a load in a vertical plane using a moving wedge design. The precision machined wedge block converts horizontal movement from a precision-ground ball screw to vertical elevation of the AVS1000 series tabletop.
Sealed linear motion guide bearings with integral wipers are incorporated to provide excellent payload capability, long life and smooth, precision motion. Stable and parallel vertical motion with no rocking or horizontal deviation of the platform is ensured.
Careful design of the wedge angle and bearing system allows the AVS1000 series to achieve submicron resolution and still maintain a compact profile. The optional factory calibration option is available to further increase standard accuracy and repeatability.
A Better Approach to Vertical Motion
The vertical lift approach offers an alternative to traditional Z-plane oriented stages. Not only do the AVS1000 series stages offer a lower profile, but the load can also be accessed easily from any side. And by centering the payload over the bearings, there are no cantilevering effects.
Motor and Drives
The AVS1000 series includes Aerotech's high performance NEMA 34 frame-size BMS series brushless, slotless servomotor. The slotless motor has zero cogging and therefore is optimized for applications requiring very smooth motion.
Aerotech manufactures a wide range of matching drives and controls to provide a fully integrated and optimized motion solution.
|Travel||5 mm||10 mm|
|Accuracy(1)||Standard||±2.0 µm||±4.0 µm|
|Calibrated||±1.0 µm||±1.0 µm|
|Bidirectional Repeatability(1)||±0.5 µm|
|Straightness(2)||±0.5 µm||±1.0 µm|
|Pitch(2)||±5 arc sec||±7.5 arc sec|
|Roll(2)||±5 arc sec||±7.5 arc sec|
|Yaw(2)||±5 arc sec||±7.5 arc sec|
|Maximum Speed||20 mm/s|
|Maximum Acceleration||0.05 g|
|Load Capacity(3)||Vertical||135 kg|
|MTBF (Mean Time Between Failure)||15,000 Hours|
- Certified with each stage.
- Specifications are for no-load condition. Pitch, roll and straightness may be affected by amount and centering of the load.
- Load must be centered within the stage aperture.
- Specifications are for single-axis systems measured 25 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.
|Drive System||Brushless Rotary Servomotor|
|Feedback||Noncontact Linear Encoder|
|Maximum Bus Voltage||up to 320 VDC|
|Limit Switches||5 V, Normally Closed|
|Multi-Axis||A3200||Ndrive MP/Ndrive CP/Ndrive HLe/Npaq MXR|
|Ensemble||Ensemble MP/Ensemble CP/Ensemble HLe/Epaq|
|Single Axis||Soloist||Soloist MP/Soloist CP/Soloist HLe|
- Linear amplifiers are required to achieve the listed specifications. Other options are available.
AVS1000 Mechanical-Bearing Ball-Screw Lift Stage
|-05||5 mm travel|
- Note: Custom travels available; consult Aerotech for more information.
|-M1||BMS280 brushless servomotor and 1000-line TTL encoder|
|-M2||BMS280 brushless servomotor and 1000-line TTL encoder with brake|
|-M3||BMS280 brushless servomotor and 1000-line 1 Vpp encoder|
|-M4||BMS280 brushless servomotor and 1000-line 1 Vpp encoder with brake|
|-LI1||Normally-closed limit switches, 9-pin D connector|
|-LI2||Normally-closed limit switches, flying leads|
|-LI3||Normally-open limit switches, 9-pin D connector|
|-LI4||Normally-open limit switches, flying leads|
|-PL1||Metrology, uncalibrated with performance plots|
|-PL2||Metrology, calibrated (HALAR) with performance plots|
Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system.
|-TAS||Integration - Test as system
Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration.
|-TAC||Integration - Test as components
Testing and integration of individual items as discrete components. This is typically used for spare parts, replacement parts, or items that will not be used or shipped together (ex: stage only). These components may or may not be part of a larger system.