- Compact, high-performance elevation stage
- Precision-ground ball screw or lead screw
- DC or stepper motor options
- High-vacuum capable
- Precision crossed-roller bearings
- Multi-axis configurations available with MPS linear and rotary stages
High-Accuracy ConstructionAll MPS-SV stages feature a precision-ground ball screw and preloaded crossed-roller bearings providing smooth and accurate geometric performance, exceptional accuracy and repeatability, and 0.05 µm minimum incremental motion capabilities. The MPS50SV is also offered with a lead-screw drive option for more cost-sensitive applications.
MPS-SV motor options include a DC servomotor with rotary encoder and a stepper motor. A precision-machined wedge design and lateral constraint system provide high stiffness and load capacity while at the same time providing proper constraint of lateral motions.
Vacuum and Mounting OptionsAs with all MPS-series stages, the MPS-SV stages are available in an optional vacuum preparation to 10-6 Torr that includes a vacuum-rated connector. An optional mounting plate provides direct mounting to both English and metric optical breadboard tables. The inherent mounting compatibility of all MPS stages allows for simple mounting in multi-axis arrangements.
|Travel||5 mm||5 mm|
|Accuracy||1.0 mm/rev Ball Screw||Standard||±2.5 µm||±2.0 µm|
|Calibrated(1)||±1.0 µm||±1.0 µm|
|0.5 mm/rev Lead Screw||Standard||±3.0 µm||N/A|
|Resolution (Minimum Incremental Motion)||0.05 µm||0.05 µm|
|Repeatability (Bidirectional)(1)||1.0 mm/rev Ball Screw||±0.75 µm||±0.75 µm|
|0.5 mm/rev Lead Screw||±1.0 µm||N/A|
|Straightness||±3.0 µm||±3.0 µm|
|Maximum Speed||1.0 mm/rev Ball Screw||DC Motor||0.8 mm/s||5.5 mm/s|
|SM Motor||0.15 mm/s||3.0 mm/s|
|0.5 mm/rev Lead Screw||DC Motor||0.4 mm/s||N/A|
|SM Motor||0.1 mm/s||N/A|
|Load Capacity(2)||6 kg||12 kg|
|Stage Mass||1.4 kg||2.8 kg|
|Material||Stainless-Steel Carriage; Anodized Aluminum Body|
- With Aerotech controllers.
- Payload specifications are for a single-axis system.
- Specifications for a single-axis system measured 25 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard application requirements.
|Model||MPS50SV DC Servomotor (-M1)||MPS50SV Stepper Motor (-M2)||MPS75SV Servomotor (-M1)||MPS75SV Stepper Motor (-M2)|
|Drive System||DC Brush Servomotor with 14:1 Gearbox||24 VDC Bipolar Stepper Motor with 43:1 Gearbox||DC Brush Servomotor||24 VDC Bipolar Stepper Motor|
|Feedback||512 lines/rev Rotary Encoder||N/A||10,000 lines/rev Rotary Encoder||N/A|
|Electronic Resolution||1.0 mm/rev Ball Screw||0.0051 µm||0.0071 µm @ 480 steps/rev Motor Resolution||0.0028 µm||0.0028 µm @ 40,000 steps/rev Motor Resolution|
|0.5 mm/rev Lead Screw||0.0026 µm||0.0035 µm @ 480 steps/rev Motor Resolution||N/A||N/A|
|Maximum Bus Voltage||48 VDC||48 VDC1||48 VDC||48 VDC1|
|Limit Switches||5 V, Normally Closed|
- 1. With Aerotech controllers.
|Model||DC Motor and SM Motor|
|Multi-Axis||A3200||Npaq/Npaq MR/Ndrive MP|
|Ensemble||Ensemble LAB/Epaq/Epaq MR/Ensemble MP|
|Single Axis||Soloist||Soloist MP|
MPS-SV Series Miniature Mechanical-Bearing Screw-Driven Lift Stage
|MPS50SV-5||MPS50SV-5 miniature mechanical-bearing screw-driven lift stage, 5 mm travel|
|MPS75SV-5||MPS75SV-5 miniature mechanical-bearing screw-driven lift stage, 5 mm travel|
Drive Screw (Required - MPS50SV-5 ONLY)
|-BS||Precision-ground ballscrew, 1 mm/rev|
|-LS||Precision-ground leadscrew, 0.5 mm/rev|
- *Note: -LS Leadscrew option is valid only on MPS50SV-5.
Vacuum Preparation (Optional)
|-HV||High vacuum preparation to 10e-6 torr|
Mounting Plate (Optional)
|-MP||Optical table mounting plate|
|-PL0||No metrology performance plots|
|-PL1||Metrology, uncalibrated with performance plots|
|-PL2||Metrology, calibrated (HALAR) with performance plots|
|Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system.|
|-TAS||Integration - Test as system
Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration.
|-TAC||Integration - Test as components
Testing and integration of individual items as discrete components. This is typically used for spare parts, replacement parts, or items that will not be used or shipped together (ex: stage only). These components may or may not be part of a larger system