- Fully preloaded air-bearing
- Available with up to 1000 mm travel
- High-accuracy linear encoder feedback
- Complete noncontact design
- Ultra-smooth design for outstanding velocity stability
The ABL2000 combines excellent pitch/yaw characteristics with the unsurpassed velocity control that is necessary for printing, imaging, semiconductor and photonic applications.
By utilizing a magnetic preload, the ABL2000 features a smaller cross-section than typical air-bearing stages without sacrificing load capability. The large air-bearing surfaces provide excellent stiffness, allowing for heavy loading. Proprietary manufacturing techniques result in a stage with unsurpassed pitch, roll and yaw characteristics. Manufactured in Aerotech’s state-of-the-art production facility, the ABL2000 is machined with exacting tolerances that are unachievable by conventional methods.
Linear Motor Drive
The driving force behind this stage is Aerotech’s BLMC brushless linear servomotor. The BLMC utilizes an ironless forcer, which means there is zero cogging and no attractive forces – resulting in unrivaled smoothness of motion. Since the stage is friction-free and the motor has zero cogging, extremely fine resolutions are achievable.
The noncontact air bearing, noncontact linear motor drive and noncontact feedback device ensure years of maintenance-free operation at the high performance levels that are expected of Aerotech equipment. Because there is no mechanical contact between moving elements, the ABL2000 experiences no wear or reduction in performance over time. Service life is virtually unlimited, and since there is no lubrication – only clean, dry gas – air bearings are ideal for clean room and medical applications.
Years of research have resulted in what is universally considered to be the best cable management system (CMS) in the industry. We carefully optimize the cable bend radius and utilize only the highest quality cable to ensure years of trouble-free operation. In the unlikely event of failure, Aerotech’s modular design makes cable replacement quick and easy with minimal downtime. To facilitate integration into the final system, we include all customer-required cables, air hoses, etc. in our CMS bundle. Both ends are fully connectorized for simple integration into the customer’s machine. High flex ribbon cable versions are also available.
|Total Travel||100 mm||200 mm||300 mm||400 mm||500 mm||750 mm||1000 mm|
|Motor Type||Linear Brushless Servomotor|
|Bus Voltage(1)||80 VDC|
|Feedback||Noncontact Linear Encoder|
|Maximum Speed(3)||2 m/s|
|Maximum Acceleration||2 g (No Load)|
|Maximum Load(4)||50.0 kg|
|Accuracy||-E1 Encoder||Calibrated(1)||±0.5 µm||±0.75 µm||±1 µm|
|Uncalibrated||±4.0 µm||±8.0 µm||±11.5 µm||±14.0 µm||±15.75 µm||±18.5 µm||±20.0 µm|
|-E3 Encoder||Calibrated(1)||±0.5 µm||±0.75 µm||±1 µm|
|Repeatability||-E1 Encoder||±0.2 µm||±0.3 µm||±0.4 µm|
|LN||±0.2 µm||±0.3 µm||±0.4 µm|
|Straightness and Flatness||Maximum Deviation||±0.25 µm||±0.40 µm||±0.75 µm||±1.5 µm||±2.0 µm||±3.0 µm||±4.0 µm|
|Pitch/Roll/Yaw||1 arc sec||2 arc sec||3 arc sec||4 arc sec||5 arc sec||7.5 arc sec||10 arc sec|
|Nominal Stage Mass||30.0 kg||34.5 kg||39.5 kg||44.0 kg||49.0 kg||61.0 kg||72.5 kg|
|Operating Pressure(7)||80 psig ±5 psig|
|Air Consumption(8)||19.8 SLPM (0.7 SCFM) (Single Axis)|
|Moving Mass||9 kg|
|Finish||Hard Coating (62 Rockwell Hardness)|
- When mounting the ABL2000 in an XY configuration, the maximum upper axis length is 300 mm.
- Maximum speed based on stage capability; maximum application velocity may be limited by system data rate and system resolution.
- Maximum load based on bearing capability; maximum application load may be limited by acceleration requirements.
- Available with Aerotech controllers.
- To protect air bearing against under-pressure, an in-line pressure switch tied to the motion controller/amplifier ESTOP input is recommended.
- Air supply must be clean, dry to 0°F dew point and filtered to 0.25 µm or better; recommend nitrogen at 99.9% purity.
- Specifications are for single-axis systems measured 25 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.
ABL2000 Air-Bearing Direct-Drive Linear Stage
|-0100||100 mm travel|
|-0200||200 mm travel|
|-0300||300 mm travel|
|-0400||400 mm travel|
|-0500||500 mm travel|
|-0750||750 mm travel|
|-1000||1000 mm travel|
|-E1||Incremental linear encoder; 1 Vpp amplified sine output|
|-E2||Incremental linear encoder; 1.0 µm digital TTL output|
|-E3||High-accuracy incremental linear encoder; 1 Vpp amplified sine output|
|-LI1||Normally-closed, 5V end-of-travel limit switches|
|-LI2||Normally-open, 5V end-of-travel limit switches|
Cable Management (Optional)
|-CMS1||Cable management system for lower-axis of XY assembly|
|-CMS2||Cable management system for upper-axis of XY assembly|
|-PL1||Metrology, uncalibrated with performance plots|
|-PL2||Metrology, calibrated (HALAR) with performance plots|
|Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system.|
|-TAS||Integration - Test as system
Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration.
|-TAC||Integration - Test as components
Testing and integration of individual items as discrete components. This is typically used for spare parts, replacement parts, or items that will not be used or shipped together (ex: stage only). These components may or may not be part of a larger system
Accessories (to be ordered as separate line item)
|ABF||Air-bearing filtration kit|