- Precision-ground, high-accuracy lead screw
- Ultra-fine resolution
- Crossed-roller bearings for high load capacity and smooth motion
- Includes cogless, brushless servomotor
- Compact profile
The ATS0300 provides an economical solution for applications requiring fine positioning in a confined area. ATS0300 series stages feature bases made from a special aluminum alloy tooling plate for good stiffness and long-term stability. Other high quality features are crossed-roller linear bearings for smooth travel and excellent payload characteristics, a precision-ground lead screw for high accuracy and hardcoat treated base and table for high resistance to marring and scratching. Table mounting holes have Helicoil™ stainless steel inserts to permit multiple screw insertions without thread wear.
The ATS0300's precision-ground lead screw results in submicron resolution.
ATS0300 series stages are easily configured in XY, XZ or XYZ arrangements. The precision-machined HDZ3 right angle L-bracket is designed for Z-axis applications and the HDT3 bracket is ideal for lower profile configurations.
Both metric and English mounting and bolt-hole patterns are available. A large thru-hole aperture version is available that is ideal for applications requiring backlighting. As is the case with all ATS series stages, the ATS0300 may be vacuum prepared to 10-6 torr.
Motors and Drives
The standard motor included with the ATS0300 is Aerotech's BMS series brushless, slotless motor. This motor utilizes an ironless design so there is no cogging, which results in no torque ripple throughout the range of motion. Aerotech's amplifiers and controllers range from easy-to-use point-to-point indexers to sophisticated multi-axis contouring controllers. Form factors include stand-alone controllers with RS-232 and IEEE-488 interfaces, to the advanced software-based Automation 3200.
|Bus Voltage||Up to 160 VDC|
|Maximum Travel Speed||4 mm/s|
|Maximum Load(1)||Horizontal||25.0 kg|
|Accuracy||2.5 µm /25 mm|
|Straightness and Flatness||2.5 µm/25 mm|
|Nominal Stage Weight||Less Motor||1.4 kg|
|With Motor||2.5 kg|
- Payload specifications are for single-axis system and based on lead screw and bearing life of 250 km (10 million inches) of travel.
ATS0300 Series Mechanical-Bearing Screw-Driven Linear Stage
|-TT1||Tabletop with metric dimension mounting|
|-TT2||Tabletop with English dimension mounting|
|-TT3||Tabletop with metric dimension mounting and aperture|
|-TT4||Tabletop with English dimension mounting and aperture|
|-M1||BMS60 brushless servomotor with 1000-line TTL encoder|
|-M2||SM60 high voltage stepper motor|
|-LI1||Normally-closed limit switches; 5 VDC with 9-pin D connector|
|-LI2||Normally-open limit switches; 5 VDC with 9-pin D connector|
|-CP1||Coupling for 0.250 inch diameter shaft|
|-CP2||Coupling for 0.375 inch diameter shaft|
|-PL0||No metrology performance plots|
|-PL1||Metrology, uncalibrated with performance plots|
|Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system.|
|-TAS||Integration - Test as system
Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration.
|-TAC||Integration - Test as components
Testing and integration of individual items as discrete components. This is typically used for spare parts, replacement parts, or items that will not be used or shipped together (ex: stage only). These components may or may not be part of a larger system
Accessories (to be ordered as a separate line item)
|ALIGN-NPA||Non-precision XY assembly|
|ALIGN-NPAZ||Non-precision XZ or YZ assembly|
|ALIGN-PA10||XY assembly; 10 arc sec orthogonality. Alignment to within 7 microns orthogonality for short travel stages.|
|ALIGN-PA10Z||XZ or YZ assembly with L-bracket; 10 arc second orthogonality. Alignment to within 10 microns orthogonality for short travel stages.|
|ALIGN-PA5||XY assembly; 5 arc sec orthogonality. Alignment to within 3 microns orthogonality for short travel stages.|
|ALIGN-PA5Z||XZ or YZ assembly with L-bracket; 5 arc second orthogonality. Alignment to within 5 microns orthogonality for short travel stages.|
|HDZ3||English right angle L-bracket|
|HDZ3M||Metric right angle L-bracket|
|HDZ3A||English right angle L-bracket with aperture|
|HDZ3AM||Metric right angle L-bracket with aperture|
|HDT3||English low-profile right angle L-bracket|
|HDT3M||Metric low-profile right angle L-bracket|
|HDT3A||English low-profile right angle L-bracket with aperture|
|HDT3AM||Metric low-profile right angle L-bracket with aperture|