ABF Air Bearing Filtration Kit


Design Features

  • Cleans and conditions compressed air used to supply air-bearing mechanics
  • Compatible with all Aerotech air-bearing stages — both linear and rotary
  • Optional low pressure switch helps protect air-bearing mechanics in the event of air pressure loss
  • Left- or right-hand air inlet options along with a convenient two-point angle bracket mount increases accessibility


Ordering Information

ABF Air Bearing Filtration Kit

Flow Rate (Required)

-FL1 Flow rate up to 23.9 SLPM
-FL2 Flow rate up to 168.3 SLPM

Inlet Side (Required)

-IN1 Left side inlet
-IN2 Right side inlet

Fitting Type (Required)

-OT1 English one-touch fitting
-OT2 Metric one-touch fitting

Pressure Switch (Required)

-PC1 Pressure switch with 26-pin high density D connector
-PC2 Pressure switch with flying leads
-PC3 Pressure switch for ML/MP drive with flying leads
-PC4 Pressure switch for Npaq MR/Epaq MR
-PC5 Pressure switch for Npaq
-PC6 Pressure switch for Automation1-XR3
-PC7 Pressure switch for Automation1-XC2/Automation1-XL2

Cable Length (Required)

-xx Cable length for pressure switch in dm (1 meter = 10 dm)
Minimum length = 10 dm, m­aximum length = 50 dm

Breakout Block (Optional)

-BB1 15-pin D breakout block, 7.6 dm of cable
-BB2 25-pin D breakout block, 9.1 dm of cable
-BB3 26-pin HD breakout block, 7.6 dm of cable

Power Supply (Optional)

-PS1 Power supply assembly, 24 VDC 3.2 amp

Integration (Required)

Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system.
-TAS Integration - Test as system
Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration.
-TAC Integration - Test as components
Testing and integration of individual items as discrete components. This is typically used for spare parts, replacement parts, or items that will not be used or shipped together (ex: stage only). These components may or may not be part of a larger system
    *Note: Filter replacements are available from Aerotech. Refer to the product manual for filter replacement guidelines. Contact Aerotech Global Technical Support to order replacements.